Dell PowerEdge M820 (for PE VRTX) - Manual (Page 117)

Error Code Message Information
Action Re-seat the memory modules. If the issue persists, see
Getting Help .
PST0129
Message Memory is detected, but is not configurable.
LCD Message Memory is detected, but is not configurable. Check memory
devices.
Details System BIOS detected memory, but was unable to configure
the memory for system operation.
Action Compare system memory installation to supported system
memory configurations.
PST0130
Message Memory is configured, but not usable.
LCD Message Memory is configured, but not usable. Check memory
devices
Details The system BIOS encountered device failures or speed
configurations that resulted in unused memory.
Action Re-seat the memory modules. If the issue persists, see
Getting Help .
PST0131
Message System BIOS shadow failed.
LCD Message System BIOS shadow failed. Check memory devices.
Details Memory errors occurred copying BIOS image into system
memory.
Action Remove input power. Reduce system memory to minimum
configuration and apply input power.
PST0132
Message CMOS failed.
LCD Message CMOS failed. Power cycle system.
Details System BIOS detected a failure with CMOS memory during
system POST.
Action Check system event log for CMOS battery exceptions.
Remove and reapply input power. If the issue persists, see
Getting Help .
PST0133
Message DMA controller failed.
LCD Message DMA controller failed. Power cycle system.
117