Dell PowerEdge M820 (for PE VRTX) - Manual (Page 99)

Error Code Message Information
Details The backplane may be necessary for proper operation.
System functionality may be degraded.
Action If removal was unintended, check presence, then reinstall or
reconnect.
HWC1010
Message The backplane is disabled.
Action If disabled unexpectedly, re-enable backplane.
HWC1015
Message The PCIe mezzanine card <number> is absent.
Details The PCIe mezzanine card may be necessary for proper
operation. System functionality may be degraded.
Action If removal was unintended, check presence, then reinstall or
reconnect.
HWC2006
Message The <name> is not installed correctly.
LCD Message The <name> is not installed correctly. Check connection.
Details The device may be necessary for proper operation. System
functionality may be degraded.
Action Check presence, then re-install or reconnect.
HWC2008
Message A fabric mismatch detected between IOM and PCIe
mezzanine card <number>.
Details The fabric type for the IOM and PCIe mezzanine cards must
match.
Action Check chassis fabric type in CMC GUI and compare to the
type of IOM or PCIe mezzanine card.
HWC2011
Message The riser board cable or interconnect is not connected, or is
improperly connected.
LCD Message Riser board cable or interconnect failure. Check connection.
Details The riser server module cable may be necessary for proper
operation. System functionality may be degraded.
Action Check the riser board or interconnect presence, then
reinstall or reconnect.
HWC3000
Message The <name> is removed.
99