BendixKing KLN 94 - Pilots Guide - Manual (Page 116)

fier of the starting point of the trip (figure 3-197).
5. Press
F once to view the way-
point page and a second time to
approve the waypoint page.
6. Rotate the right outer knob to
position the cursor over the
groundspeed field (figure 3-198)
and then turn the right inner
knob to select the desired
groundspeed (it must be above
30 knots).
7. Press the F button.
8. Use the right outer knob to posi-
tion the cursor over the OK?
field and then press the
F but-
ton (figure 3-199). You are now
flying!
3.17 SAMPLE TRIP
We’ve talked a lot about the features of the KLN 94, and now it’s time to
put those features to work for us and try a sample trip! Our trip will be
from Adams field (KLIT) in Little Rock, Arkansas to Mueller Municipal air-
port (KAUS) in Austin, Texas. The weather is perfect and we decide to
make the trip VFR and fly direct to Austin.
3.17.1 PRE-DEPARTURE
1. Apply power to the KLN 94 by pushing the On/Off/Brightness knob to
the “in” position. Rotate the knob to adjust the display brightness to
the desired level.
2. Enter the current altimeter setting on the Self Test page and press the
F button. The cursor will move over OK?. Verify that the informa-
tion on the Self Test page is correct and press
F.
3. Verify that the information on the Initialization pages is correct, includ-
ing the time and date. Position the cursor over Ok? and press
F to
approve the Initialization page.
4. Read the Database page and acknowledge it by pressing
F.
5. The APT 5 page for Adams field (KLIT), which shows the communica-
tions frequencies, is now displayed on the screen since KLIT was the
active waypoint when you last removed power from the KLN 94. The
first APT 5 page indicates
Chapter 3 Basic GPS Operation
3-74
Figure 3-198
Figure 3-199
Figure 3-197