BendixKing KLN 94 - Pilots Guide - Manual (Page 145)

5.4.2. CREATING A WAYPOINT AT A CERTAIN
LATITUDE/LONGITUDE
It is also possible to create a user-defined waypoint by manually entering
a latitude and longitude. Let’s say you wanted to create a user waypoint
over your hypothetical farm at N 42°56.32’, W 76°29.95’
To create a user-defined waypoint with latitude/longitude:
1. From any user waypoint (USR)
page, turn on the cursor (
B).
It will be over the first character
in the waypoint identifier field
(figure 5-25).
2. Use the right inner knob to
select the first character of the
identifier (figure 5-26).
Remember that when the cursor
is on, the right inner knob
changes the character and the
right outer knob moves the cur-
sor around.
3. Spell out the rest of the identifier
using the right inner and outer
knobs (figure 5-27).
4. Move the cursor down to the
second line, over User Pos L/L?
(figure 5-28).
5. Press
F. The display will
change to a format like figure 5-
29.
6. Use the right inner knob to
select N for north or S for south
(figure 5-30).
KLN 94 Pilot’s Guide Chapter 5 Intermediate Operation
5-11
Figure 5-25
Figure 5-26
Figure 5-27
Figure 5-28
Figure 5-29
Figure 5-30