BendixKing KLN 94 - Pilots Guide - Manual (Page 46)

The KLN 94 has an internal battery powered calendar/clock, so the
date and time normally don’t require setting. The battery has a life of
approximately 3 years. In addition, the KLN 94’s system date and time
are automatically updated very precisely when at least one satellite is
being received. However, if for some reason the date or time are
incorrect, it is necessary to enter the correct date or time so that the
KLN 94 can reach the navigation mode quickly. The date should be
correct and the time should be correct within ten minutes so that the
KLN 94 will start looking for the correct satellites.
If the date is incorrect, rotate the
right outer knob counterclock-
wise until the cursor is over the
entire date field (figure 3-8).
Rotate the right inner knob until
the correct day of the month is
displayed (figure 3-9). Then,
move the cursor to the month
field by rotating the outer knob
one click clockwise and change
the month as necessary. Use the
same methods to select the cor-
rect year (figure 3-10). When
the date is correct, press
F.
6. Verify that the time displayed in
the upper right corner of the
Initialization page is correct to
within ten minutes of the actual
time. Remember, once the
KLN 94 receives the first satel-
lite, it will automatically be very
accurately updated by the satel-
lite to the correct time. However,
you are responsible for assuring
the desired time zone is selected
on the KLN 94. If it is necessary
to reset the time, position the
cursor over the time zone field
(figure 3-11) and select the
desired time zone (figure 3-12).
Chapter 3 Basic GPS Operation
3-4
Figure 3-8
Figure 3-9
Figure 3-10
Figure 3-11
Figure 3-12