Leica Geosystems TPS1100 Professional Series - User Manual - Manual (Page 110)

110 Data format TPS1100 - User Manual 2.2.1en
6
0
2
21
26
45
84
The words of a measurement block are determined by the format which is
set on the survey instrument.
Example: Measurement block with TPS1000 default values
Measurement block
Code block
The first word of a code block is always the code number. A code block can
contain between one and eight words.
Terminator of a data block
The terminator is sent by the
instrument after data blocks, after the
response sign (?) and after other
messages.
The standard terminator is CR/LF
(carriage return/line feed). TPS1100
instruments can be set to transmit
and accept only CR.
Word 1 Word 2 ..... ..... Word n
Point number Hz direction V angle Slope distance ppm mm Term
Word 1 Word 2 ..... ..... Word n
Code number Info1 Info2 Info n Term