Leica Geosystems TPS1100 Professional Series - User Manual - Manual (Page 121)

121
TPS1100 - User Manual 2.2.1en Safety directions
6
10
12
21
26
45
84
92
Safety directions
The following directions should
enable the person responsible for the
TPS-System 1100, and the person
who actually uses the instrument, to
anticipate and avoid operational
hazards.
The person responsible for the
instrument must ensure that all users
understand these directions and
adhere to them.
Permitted uses
The TPS-System 1100 electronic
theodolites and total stations are
intended for the following
applications:
• Measuring horizontal and vertical
angles
• Measuring distances (TC-models
with integrated EDM, T-models
with removable EDM)
• Recording measurements
• Computing by means of
application software
• Automatic target recognition (with
ATR)
• Visualizing the aiming direction
(with EGL guide light)
• Visualizing the vertical axis (with
the laser plummet).
Intended use of instrument
Prohibited uses
• Use of the product without
instruction
• Use outside of the intended limits
• Disabling safety systems
• Removal of hazard notices
• Opening the instrument using tools
(screwdriver, etc.), unless this is
specifically permitted for certain
functions
• Modification or conversion of the
instrument
• Use after misappropriation
• Use with accessories from other
manufacturers without the prior
express approval of Leica Geosy-
stems
• Aiming directly into the sun
• Inadequate safeguards at the
measuring station (e.g. when
measuring on roads)