Leica Geosystems TPS1100 Professional Series - User Manual - Manual (Page 25)

25
TPS1100 - User Manual 2.2.1en Preparing to measure, setting up
6
10
12
External power supply for total station
To meet the conditions stipulated for
electromagnetic acceptability when
powering the TPS1100 from an
external source, the supply cable
used must be equipped with a ferrite
core.
The Lemo plug with the
ferrite core always has to be
attached at the instrument side.
The cables supplied along with your
instrument include a ferrite core as
standard.
If you are using older cables without
ferrite core, it's necessary to attach
ferrite cores to the cable.
If you need additional ferrite cores,
please contact your local Leica Geo-
systems agency. The spare-part
number of the ferrite core is 703 707.
For assembling open up one ferrite
core and clip it around the supply
cable, about 2cm away from the
Lemo plug, before using the supply
cable for the first time together with a
TPS1100 instrument.
1100Z57
1100Z58