Leica Geosystems TPS1100 Professional Series - User Manual - Manual (Page 58)

58 System functions TPS1100 - User Manual 2.2.1en
Converting data, continued
Configuration dialog (continued)
Settings for output file
Search extens.
Determines the extension for the
output file.
Decimals
Determines the number of decimal
places in the output if this is not
limited by the format (e.g. by GSI).
Choice between "As System" and up
to six decimal places.
Returns to conversion dialog.
Calls the ASCII -
configuration dialog.
ASCII configuration dialog
The ASCII file format can be defined
in the ASCII configuration dialog. The
defined format is valid for ASCII
source files and ASCII
output files.
Separator
Determines the separator between
the data during output. Spacing,
commas and tabulator can be set.
PtId, East, North,... Position
The position in the ASCII format has
to be defined for each component
("None" or 1,..,10 can be set).
Reset to the default settings
(as shown above).
CONV\ ASCII File Format
Separator : Space
Id Pos : 1
East Pos : 2
North Pos : 3
Height Pos : 4
Pt. Code Pos : 5
OK DEFLT
MC
QUIT
Attrib 1 Pos: 6
Attrib 2 Pos: 7