Leica Geosystems TPS1100 Professional Series - User Manual - Manual (Page 95)

95
TPS1100 - User Manual 2.2.1en System functions
6
10
12
21
26
Accessories , continued
If the Hz direction of the instrument is
outside the permitted range but the
target is within it, the instrument can
still rotate itself towards the target.
If the Hz direction of the instrument is
within the permitted range but the
target is outside it, rotation is not
possible and an error report appears.
Hz direction of
instrument
Permitted range
1100Z45
Rotation towards target possible
Eyepiece V begin Starting value for
V-angle of
eyepiece.
Eyepiece V end Finishing value
for V-angle of
eyepiece.
Lens V begin Starting value for
V-angle of
objective.
Lens V end Finishing value
for V-angle of
objective.
Hz limit begin Starting value for
Hz-direction.
Hz limit end Finishing value
for Hz-direction.
The functions for transferring
information between the internal
memory and the PC-card are
described below. For transfer via
RS232 the Leica SurveyOffice PC
software is generally used, in which
event the instrument is remote-
controlled and requires no user
interface.
Loading a configuration file (LOAD)
\ Load configuration
Current : 1100_DEF
New config. : -----
Lang.System: Lang.Confi:
1. ENGLISH ENGLISH
2. GERMAN GERMAN
LOAD
MC
QUIT
Selects the configuration files from
the PC-card in the directory
"\tps\conf\".
Displays the languages available in
the system or which belong to the
configuration file.
Loads the new configuration.