Leica Geosystems TPS1100 Professional Series - User Manual - Manual (Page 79)

79
TPS1100 - User Manual 2.2.1en System functions
6
10
12
21
26
This function is for switching between
the individual [INDIV] and running
[RUN] point numbers.
Individual point number (INDIV / RUN) Coding
Standard coding (without codelist)
Code blocks are used to record addi-
tional information for subsequent
processing of the measurement data.
They are recorded in separate blocks
and consist of at least the CODE
number, along with up to 8 further
information blocks (Info 1 to 8). Each
of these editable information words
contains up to 8 (or 16) alphanumeric
characters.
Information words which include "-----
" are not stored.
In general, the code function can be
called whenever a measurement or
another data set in the measurement
file can be stored. The code function,
together with the measuring mode, is
available in most of the loadable
applications.
calls up the standard coding
(Code, Info 1 to 8) if no codelist was
selected.
When a new code is entered,
or after using the -
key,
"REC" is assigned to the - key.
Only information-bearing elements
are recorded.
\ Coding (standard)
Code : -----
Info 1 : -----
Info 2 : -----
Info 3 : -----
Info 4 : -----
Info 5 : -----
REC L Pt.
MC
ENDE
Info 6 : -----
Info 7 : -----
Info 8 : -----