Leica Geosystems TPS1100 Professional Series - User Manual - Manual (Page 120)

120
TPS1100 - User Manual 2.2.1en Care and transport
6
0
2
21
26
45
84
92
Cables and plugs
Keep plugs clean and dry.
Blow away any dirt lodged in the
plugs of the connecting cables.
Unplugging connecting cables or
removing the PCMCIA card during
the measurement may cause loss of
data. Always switch off the
instrument before removing the
cables or the PCMCIA card.
Fogging of prisms
Reflector prisms that are cooler than
the ambient temperature tend to fog.
It is not enough simply to wipe them.
Keep them for some time inside your
jacket or in the vehicle to allow them
to adjust to the ambient temperature.
Objective, eyepiece and
prisms
• Blow dust off lenses and prisms.
• Never touch the glass with your
fingers.
• Use only a clean, soft, lint-free
cloth for cleaning.
If necessary, moisten the cloth with
pure alcohol.
Use no other liquids; these may
attack the polymer components.
Cleaning and drying
Temperature limits
(-40°C to +70°C / -40°C to
+158°F) Respect the temperature
limits when storing the instrument,
particularly in summer if the
instrument is inside a vehicle.
Damp instruments must be
unpacked. Dry the
instrument, the case, the foam
inserts and the accessories at not
more than 40°C / 108°F and clean
them. Do not repack until everything
is completely dry.
Storage