Leica Geosystems TPS1100 Professional Series - User Manual - Manual (Page 63)

63
TPS1100 - User Manual 2.2.1en System functions
6
10
12
21
26
WI-No. Parameters Description
-- Offs. Elev. Elevation offset of target point
-- Offs. Lngth Length offset of target point
-- Offs.Cross Cross offset of target point
-- Offs.Mode View and select offset mode, reset after REC or keep
-- Half line space Half empty line
(*) 32 Horiz.dist. Horizontal distance (reduced slope distance)
(*) 21 Hz Horizontal direction
(*) 83 Elev. Target point height (Z)
(*) 33 Elev.Diff. Height difference between the station point and the target point with allowance made for the instrument and reflector
heights
(*) (11) Indiv.PtId Current individual point number
42
43
44
45
46
47
48
49
Info 1
Info 2
Info 3
Info 4
Info 5
Info 6
Info 7
Info 8
Additional information to the Code. Each of these editable information words can contain up to 8 or 16 alphanumeric
characters.
-- Increment Increment to encrease the running point id
(*) 88 Inst.Ht Instrument height
(*) (11) Runn.PtId Current running point id
-- Meas job View and select Meas-Job
-- EDM Prog. View and select EDM program
-- MJob Mngmt Meas-Job management: view, select, create, edit
(*) 52 n / s Number of averaged distances measured and the standard deviation in millimetre
(*) 82 North North coordinate of target point
GSI-parameters, continued