Leica Geosystems TPS1100 Professional Series - User Manual - Manual (Page 80)

80 System functions TPS1100 - User Manual 2.2.1en
Standard coding with codelist
This function becomes active if a
standard codelist has been selected.
The fixed key
is used for calling
up the codelist.
Stores the code block.
Creates a new code.
Calls the latest code stored.
Enters information.
Switches between numeric
and alphanumeric input for a
rapid search of codes.
MEAS\ TEST.CRF 〈〉 〈〉 〈〉 〈〉 〈〉
Code
101 Tree
102 Bush
103 Latern
104 Hydrant
REC NEW LAST INFO α αα αα NUM
MC
QUIT
Coding, continued
Point coding (without codelist)
In the TPS1000 instruments, the so-
called "Remarks" (REM words) were
used for storing additional
information in the measurement-data
blocks, but in the TPS1100 they have
been replaced by "Point code" and
"Attrib. 1-8".
WIs for storing:
Point code: WI 71
Attrib. 1-8: WI 72-79
Standard codes (Code, info 1 to 8)
are recorded in separate blocks in
GSI format behind the last
measurement stored. These codes
are not part of the recorded data
block (recording template).
Calls the latest codes stored,
and also the WIs.
WIs for storage:
Code: WI 41
Info 1 - 8: WI 42 - 49