Leica Geosystems TPS1100 Professional Series - User Manual - Manual (Page 65)

65
TPS1100 - User Manual 2.2.1en System functions
6
10
12
21
26
Display and recording
parameters can be defined
independently. Therefore make sure
that the recording mask contains all
parameters necessary for evaluation.
GSI-parameters, continued
If values "East" and then
"North" are defined in the
display mask and if the coordinate
display shows "Easting/Northing"
then also the Easting value followed
by the Northing value appears in the
measurement mode. However, in
connection with the display mask and
the display in the measurement
mode four cases must be
considered:
DMask Coord. Seq.
Display in
measurement
mode
Change
Easting/Northing E/N as in DMask Easting/Northing none
Easting/Northing change E/N Seq. Northing/Easting yes
Northing/Easting E/N as in DMask Northing/Easting none
Northing/Easting change E/N Seq. Easting/Northing yes