Compex Energy mi-Ready - Manual (Page 163)

161
English
4a Press the On/Off button to return to the
previous screen.
4b Some programmes require manual
selection of the muscle group you want to
stimulate. This muscle group is shown in black
on a small figurine above channel 1. Use the
channel 1 +/- button to select your chosen
group. The seven muscle groups proposed are
shown successively in black on the small
figurine:
vb
Abdomen and lower back
f
Buttocks
c
Thighs
j
Legs and feet
m
Forearms and hands
e
Shoulders and arms
td
Thorax and back
Current international standards
require that a warning be given
concerning the application of electrodes to
the thorax (increased risk of cardiac
fibrillation).
N.B. : If a cable fitted with the m-4
system (sold separately) is connected to
the device, the muscle group is selected
automatically.
4c Press the channel 2 +/- button to stop the
warming-up sequence (closing the small
animated rising convection symbol above the
radiator).
4d Use the channel 3 +/- button to choose the
programme difficulty level.
4e Use the channel 4 +/- button to confirm your
choices and launch the programme.
7. During the stimulation
session
Preliminary m-3 test
The m-3 test is launched only
if a cable fitted with the m-4 system
(sold separately) is already connected to
the stimulator when this is turned on!
I t is essential that you remain completely
still and relaxed during the entire test.
I f the m-4 system cable is
connected, the test starts immediately
after programme selection and
personalisation.
5a Press the On/Off button to interrupt the test
at any moment. To relaunch the test from the
start, press any of the 4 +/- buttons.
5e The m logo above channel 4 indicates that
the m-4 cable is connected to the
stimulator. The figures in channel 4 will
automatically change during the test as the
sensor records different measurements.
The 4 +/- buttons will be disabled for the
duration of the test.
Once the test is complete, you will automatically
be taken to the default programme start screen
and prompted to increase the stimulation
energies.
ENERGY2 FR DE IT ES EN:ENGY Man FR 31/01/08 14:36 Page 161