Compex Energy mi-Ready - Manual (Page 183)

181
English
Compex Energy is designed for use in the electromagnetic environment stipulated
below. The buyer or user of the Compex Energy must ensure it is used in this
recommended environment.
- ELECTROMAGNETIC IMMUNITY
NOTE: VT is the AC supply voltage before application of the test
level.
Electromagnetic environment - recommendations
Portable and mobile RF communication devices must only be used relative to the Compex Energy and its wiring
at a distance which is not less than the spacing recommended and calculated using the appropriate equation
for the transmitter’s frequency. Recommended spacing
d = 1.2 √P
d = 1.2 √P 80 MHz to 800 MHz
d = 2.3 √P 800 MHz to 2.5 GHz
Where P is the maximum output power of the transmitter in watts (W) set by the manufacturer’s specifications
and where d is the recommended spacing in metres (m). The field intensity of RF fixed transmitters, as determined
by an electromagnetic survey a must be less than the observance level to be found in each frequency range b .
Interference may occur close to any appliance identified by the following symbol:
Electromagnetic wave propagation is modified by absorption and reflection due to buildings,
objects and persons.
In the event of abnormal operation, new measures may then be imposed, such as realignment
or movement of the Compex Energy.
b Above the frequency amplitude from 150 kHz to 80 MHz, the field intensity must be 3 V/m.
ENERGY2 FR DE IT ES EN:ENGY Man FR 31/01/08 14:36 Page 181