2 indicators and displays, 2. indicators and displays – KEYENCE LS-3100/3100W Series User Manual
Page 24
18
Light when laser is being or about to be emitted from the scanning head.
Only LED [1] lights when one scanning head is used. Both LED [1] and LED
[2] light when two scanning heads are used.
1
1
1
1
1 Laser Emission
Indicator LEDs
2
2
2
2
2 Comparator Output
LEDs
Three LEDs, HIGH, LOW, and GO, are provided. HIGH and LOW light
respectively when the measured value is above the preset upper limit and
below the preset lower limit. GO lights when the measured value is within the
range between these two limits.
3
3
3
3
3 Current Setting
Indicator
Lights when one of OFFSET, AUTO-ZERO, HOLD, or PANEL LOCK has
been selected.
4
4
4
4
4 Main Display
(Channel 1)
Shows a measured value.
5
5
5
5
5 Target Position
Indicators
Indicate where the target is located in the measurement area.
6
6
6
6
6 Subdisplay
(Channel 2)
4-2. Indicators and Displays
Shows preset values when only one scanning head is used. It shows a
measured value when two scanning heads are used.
A measured value is displayed in 8 digits and updated 10 times per second.
CHAPTER 4 Functions and Controls
OFFSET ZERO HOLD LOCK
POSITION
mm
inch
3
4
5
6
LASER SCAN DIAMETER
LASER
LASER
1
2
LIMIT
HIGH
GO
LOW
1
2
LS
08.10.1, 10:54 AM
18