KEYENCE LS-3100/3100W Series - Manual (Page 51)

45
CHAPTER 4 Functions and Controls
G G G G G PROG (Program)
Key
The LS controller can store the currently displayed settings. Up to 10 types
of settings can be stored with each assigned a program number. Each type
of settings can be retrieved through its program number for quicker opera-
tion.
* BAUD RATE, BUZZER ON/OFF, HOLD type, HEAD2 ON/OFF, and
POSITION CHECK cannot be stored.
Storing (SAVE) Settings 1. Enter the desired parameters.
2. Press PROG to display "PROG".
3. Enter the desired program No.
4. Press ENT to register. At this moment, only the program No. has been
selected.
5. Use UP/DOWN to move the cursor down to "SAVE".
6. Press SET to display "SA OK?". Press ENT to accept or CLR to cancel.
7. When you enter ENT, the settings will be stored under the selected
program No. When you press CLR, you can resume from step 3.
Example of Operation Storing the current settings under program No.6.
Step Key operation Display
1 Press PROG.
2 Enter "6".
3 Press ENT.
4 Use UP/DOWN to move
cursor down.
5 Press SET.
6 Press ENT to accept.
R O G P 2
S A
L O A D
V E
R O G P 6
S A
L O A D
V E
] [
R O G P 6
S A
L O A D
V E
R O G P 6
S A
L O A D
V E
R O G P 6
S A
L O A D
O K ?
R O G P 6
S A
L O A D
V E
R O G P 1
S A
L O A D
V E
R O G P 5
S A
L O A D
O K ?
08.10.1, 10:55 AM 45