KEYENCE AutoID - Manual (Page 101)

5-5
5-2 Setting Macro Operations
OT
HER SETT
INGS AND OPERA
T
ION
S
5
Macro Test
The following describes the [Macro test] tab for the macro registered to the RF-500 Series.
Be sure to send the programmed macro to the RF-500 Series before executing the operation test.
Item Description
(1) Commands The type of command is displayed.
(2) Codes The code that indicates the operation result is displayed.
(3) Result data Displays the operation result data.
(4) "Test" button Executes the test.
(5) Operation results Displays the result of operations 1 to 3 that were set to the macro.
(2) Codes
(5) Operation results (4) "Test" button
(1) Commands (3) Result data