KEYENCE AutoID - Manual (Page 56)

4-6
SETT
ING DEVICE OPER
A
T
IONS
4
4-2 RF-500 Series Settings
Act Setting
This section describes the [Act setting] tab for the head.
■ Action mode
■ I/O setting
Item Description
Trigger setting
Select from Level trigger, One-shot trigger and Auto trigger as the trigger mode.
"RF-500 Series Operation Manual"
Access retry count
Set the access retry count when "One-shot trigger" or "Auto trigger" is set at
Trigger setting.
"RF-500 Series Operation Manual"
Auto trigger on delay
Set the time for preventing continuous action of the auto trigger when "Auto
trigger" is set at Trigger setting.
"RF-500 Series Operation Manual"
Item Description
Output duration
Set the ON time for when OUT1 to OUT4 terminals are used to transfer the
operation result to the host device.
Input state Set Norm. open or Norm. close as the polarity of the input contact.