KEYENCE AutoID - Manual (Page 80)

4-30
SETT
ING DEVICE OPER
A
T
IONS
4
4-6 CC-Link Controller (NX-50CL) Settings
Parameters to be Set
There are four parameter items to be set up for the CC-Link controller (NX-50CL). Switch to the
desired setting item by clicking the respective tab and set the parameters on that tab.
(1) RS-232C (modular) setting (2) Head setting (3) Terminal setting (4) CC-Link setting
Setting Item Description See Page
(1) RS-232C (modular)
setting
This tab is for setting communication over an RS-232 connection. 4-31
(2) Head setting This tab is for setting communication with the head. 4-32
(3) Terminal setting This tab is for setting the I/O terminals. 4-33
(4) CC-Link setting
This tab is for setting communication over a CC-Link connection.
The slave ID (station No.) is set here.
4-34