Head setting, Head setting -27 – KEYENCE AutoID User Manual
Page 77
Advertising
4-27
4-5
RS-485 Controller (NX-50RS) Settings
SETT
4
Head Setting
The following describes the settings of the [Head setting] tab for the NX-50RS.
Item
Description
Autoconnection with head
Select Disable/Enable for Autoconnection with head.
Baud rate
Select the baud rate (bit/s) from the pulldown menu.
Parity
Select None, Even or Odd for Parity.
Data bits
Select 7 bits or 8 bits for Data bits.
Stop bit
Select 1 bit or 2 bits for Stop bit.
Advertising