Output data setting, Output data setting -9 – KEYENCE AutoID User Manual
Page 59
Advertising
4-9
4-2
RF-500 Series Settings
SETT
4
Output Data Setting
This section describes the [Output data setting] tab for the head.
Item
Description
Additional information
(processing time)
Set Disable/Enable for Additional information (processing time).
Additional information
(retry count)
Set Disable/Enable for Additional information (retry count).
Header
Select None, STX or ESC for Header.
Delimiter
Select CR, ETX or CR+LF for Delimiter.
Checksum
Select Don't add or Add for Checksum.
Send delay time
Set the send delay time.
Advertising