7 devicenet controller (nx-50dn) settings, Parameters to be set, 7 devicenet controller (nx-50dn) settings -35 – KEYENCE AutoID User Manual
Page 85: Parameters to be set -35, Devicenet controller (nx-50dn) settings -35, Devicenet controller (nx-50dn) settings
Advertising
SETT
4
4-35
4-7
DeviceNet Controller (NX-50DN) Settings
Parameters to be Set
There are four parameter items to be set up for the DeviceNet controller (NX-50DN). Switch to the
desired setting item by clicking the respective tab and set the parameters on that tab.
(1) RS-232C (modular) setting
(2) Head setting
(3) Terminal setting
(4) DeviceNet setting
Setting Item
Description
See Page
(1) RS-232C (modular)
setting
This tab is for setting communication over an RS-232C
connection.
(2) Head setting
This tab is for setting communication with the head.
(3) Terminal setting
This tab is for setting the I/O terminals.
(4) DeviceNet setting
This tab is for setting communication over a DeviceNet
connection.
The slave ID (MAC ID) is set here.
Advertising