KEYENCE AutoID - Manual (Page 110)

6-4
TEST
FUN
C
TIO
N
S
6
6-3 View Image Function
The "View image function" is used to import the image that the SR-500 Series is currently viewing
or the read NG images stored in the memory of the SR-500 Series into AutoID Navigator.
View image function screen
Item Description
Target:
Select the SR-500 device with which to execute this function.
You cannot select SR-500 devices that are not connected or other devices.
Display
Select the display to which to import images. Two patterns of image can be
displayed so that images can be compared. The imported images can be
enlarged or saved as a bmp file.
Capture image
Click the Capture button to acquire an image from the SR-500 Series.
• Camera param 1 to 8: Select the camera parameter with which to acquire
the image.
• Latest image: Acquires the latest image.To stop the image
acquisition, click the Stop button.
(The cancelled image can also be saved.)
Get image
Acquires the NG images stored in the SR-500.
* To acquire NG images, enable the NG image save setting on the SR-500
Series device setting.
• Check: Checks whether NG images are present.
• Get:
Imports the selected NG images into AutoID Navigator.
• Clear: Clears all the NG images stored in the SR-500 Series.
• Stop:
Stops acquiring the image.