Rs-232c port setting, Rs-232c port setting -10 – KEYENCE AutoID User Manual
Page 60
Advertising
4-10
SETT
4
4-2
RF-500 Series Settings
RS-232C Port Setting
This section describes the [RS-232C port setting] tab for the head.
Item
Description
Baud rate
Select the baud rate (bit/s) from the pulldown menu.
Parity
Select None, Even or Odd for Parity.
Data bits
Select 7 bits or 8 bits for Data bits.
Stop bit
Select 1 bit or 2 bits for Stop bit.
Protocol
Select None, PASS/RTRY, ACK/NAK or Multi-drop as the software-based
communication protocol.
ID (1 to 31)
Set the ID No. of the head.
This is set when "Multi-drop" is set at Protocol.
RTS/CTS protocol
Select Disable or Enable for RTS/CTS protocol.
Set this when the Protocol setting is other than "Multi-drop".
Advertising