KEYENCE AutoID - Manual (Page 75)

SETT
ING DEVICE OPER
A
T
IONS
4
4-25
4-5 RS-485 Controller (NX-50RS) Settings
Parameters to be Set
There are six parameter items to be set up for the SR-500 Series. Switch to the desired setting
item by clicking the respective tab and set the parameters on that tab.
Setting Item Description See Page
(1) RS-232C (modular)
setting
This tab is for setting communication with the host. 4-26
(2) Head setting This tab is for setting communication with the head. 4-27
(3) Terminal setting This tab is for setting the I/O terminals. 4-28
(4) RS-485 setting
This tab is for setting communication over an RS-485 connection.
The ID is set here.
4-29
(1) RS-232C (modular) setting (2) Head setting (3) Terminal setting (4) RS-485 setting