4 data compatibility, Compatibility between setup files, 4 data compatibility -11 – KEYENCE AutoID User Manual
Page 21: Compatibility between setup files -11, Data compatibility -11, Data compatibility
Advertising
BEFORE YOU ST
1
1-11
1-4
Data Compatibility
The following describes data compatibility.
Compatibility between Setup Files
AutoID Navigator does not support the reading of setup files made on the following setup soft-
ware:
• Barcode Reader BL Series Setup Software
• Multi-drop Link Unit N-400 Setup Software
Also, setup files made on the AutoID Navigator are not compatible with setup files made on the
above setup software.
• N-410 settings cannot be made on N-400 Setup Software.
• N-400 settings cannot be made on AutoID Navigator. When using N-400, use
the existing N-400 Setup Software.
• When changing the settings of a BL Series used on an existing system, set the
device settings again on AutoID Navigator for use.
Note
Advertising