KEYENCE AutoID - Manual (Page 58)

4-8
SETT
ING DEVICE OPER
A
T
IONS
4
4-2 RF-500 Series Settings
■ Verification setting
Set the preset data when executing each of the "[VD] Verify data" and "[VB] Verify bit" commands.
" RF-500 Series Operation Manual "
■ Authentication setting
Set the password and authentication key for when the "[WK] Authentication key" command for
preventing forgery is executed.
These can be set when the "Authentication setting" key is clicked.
" RF-500 Series Operation Manual "
Item Description
Preset data Set the preset data in ASCII code or Hexadecimal (HEX).
Preset bits Set the preset bit data.
Preset top address Specify the top address and size when data read from an IC tag is to be taken
as the preset data.
Preset size (byte)
Item Description
Authentication key Set the authentication key.
New password Enter the new password.
Password Enter the current password.