KEYENCE AutoID - Manual (Page 94)

4-44
SETT
ING DEVICE OPER
A
T
IONS
4
4-8 RS-485 Master Unit (N-410) Settings
■ PLC Link
The following describes setting of the PLC Link when "PLC setting" is set to "Enable".
Item Description
DM head address Set the head address of data memory (DM) to be used in the PLC Link.
Station No. Set the station No. within the range 00 to 31.
Input trigger area Set Disable or Enable for Input trigger area.
PLC type
When PLC Link is set to "Enable", select MELSEC Series, KEYENCE KV Series
or SYSMAC Series.