Using the battery pack (cont’d), Attach the battery pack to the ac adaptor, How to use the charging confirmation marker – Panasonic NVS7EG User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ENGLISH
Using the Battery Pack (cont’d)
■ Howto Use the Convenient Discharges Charge Function
If a Battery Pack is recharged repeatedly in not completely
discharged condition, the so-called “memory effect” will occur, and
the operation lime of theirecharged Battery Pack will gradually
become shorter . Therefore, it is recommended to regenerate the
Battery Pack after approx, every fifth recharging by using the
convenient Discharges Charge Function.
ILLUSTRATION
1
2
Attach the Battery Pack to the AC Adaptor.
Connect the Power Cable of the AC Adaptor to the mains.
•The Power Lamp O'lights gp, and soon after, the Charging
Lamp lights up.
vJ Press the Discharges Charge Button for more than
1 second.
•The Discharge Lamp © lights upv and the Charge Lamp:@
goes out.
■ When the discharging is finished. the Charge Lamp © lights
up instead, and the charging starts.
■ When the charging is completed, the Charging Lamp ©
goes out.
•When usirig the Discharges Charge Function, the charging takes
five or six times as long as normal chargihg.
■ How to Use the Charging Confirmation Marker
This marker makes it convenient to distinguish betvyeen charged
and discharged Battery Packs. For example, slide the kriob so that
the dot © is visible to mark a charged Battery Pack, and slide it so
that the dot iis not visible for a partially or-fully discharged Battery
Pack.
20-