Brother Fax-700 User Manual

Page 133

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

6.

TROUBLESHOOTING

SYMPTOM

POSSIBLE CAUSE

ACTION

Ref.

Documents are
impossible to feed

• Documents have been

inserted in the position for

recording paper output

• Insert the documents into

the transmission document

wire extension

3-4

Password transmis-

• Password function on

• Contact the receiver

sion error

receiving end is OFF

• Passwords do not match

• Contact the receiver to con-

• Receiving unit has no

password function

• Receiving unit is not a

Brother series machine

firm the code being used

• Contact the receiver

• Contact the receiver to con­

firm the machine being used

Image quality of
document is poor

• Problem with receiving

unit

• Use your fax unit to make a

test

mpy (Tf

this is accept­

able, then the problem is at
the other end)

3-8

• Scanning head is dirty
• Scanning head is bad
• Printing is too heavy or

too light.

• Clean the scanning head
• Call Brother service
• Adjust the image quality

7-2

Documents sent

• Document is face up in the

• Set the document face down

are received blank

feeder

in the feeder and send it

again

Auto transmission
is not working

• The wrong (a non-fax)

number was dialed

• Double check the fax num­

ber you have registered in

the machine

• Polled^ or transmission or

• Use the interrupt function

5-43

redialing with a document
in the feeder is being car­
ried out

Delayed sending
does not work

• The HOOK key has been

pressed or the handset
was picked up

• Polled, transmission, or

• Refer to the instructions and

begin again

• Use the interrupt function

5-43

redialing with a document

in the feeder is being car-
ried out

• The maximum number

• Wait until the delayed trans-

(three) of delayed trans­
missions have been set up

(on the FAX-800M)

missions already set have
been carried out

6-3

Advertising
This manual is related to the following products: