Brother Fax-700 User Manual
Page 27
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
J
SETTING UP
3.
CONNECTING THE HANDSET
1) Insert the handset line cord into the base of the handset as
2) Draw the handset line cord through the gap provided to
prevent the
cord from being pinrhed between the base and
the fax unit. Set the fax unit on its side so the slot for sliding
the handset base into position is accessible. Insert the hand
set into the slot
provided.
Insert
until the handset base is
fixed in position.
3) Insert the remaining end of the handset line cord into the
"HANDSET BASE" socket located at the rear of the ma
chine. Again, listen for the click when inserting the plug
into the socket.
4) Insert the curled cord into the base of the handset as illus
trated. Listen for the click.