Brother Fax-700 User Manual
Page 52
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
BASIC USES
Turning the transmission report on and off
You can learn whether or not your fax transmissions are suc
cessful by printing out a transmission report. If this function
is on, a report will be printed automatically after each trans
mission.
1) Press the
FUNCTION
key. A message will prompt you to
use the cursor keys to scroll through the functions manual
ly. Scrolling will begin automatically after two seconds.
U S E < > T O S C R O L L
E N T E R N O . & S E T K E Y
2) Press
2.
2 . P R I N T R E P O R T S
P R E S S S T O P T O C A N C E L
3) Press
SET
to confirm your selection. The secondary func
tions for this item will be scrolled two at a time on the LCD
until a selection is made.
1 . A C T I V I T Y R E P O R T
2 . O N E - T O U C H D I A L L I S T
4) Press
8
and use the cursor keys to turn the transmission re
port ON or OFF.
T R A N S M I T R E P O R T : O N
S F I F C T < > A S E T K E Y
5) After you have
made your
selection, press
SET.
The cur
rent and following secondary functions will appear on the
LCD. Press a number key if you want to work with a differ
ent report. If you want to exit operations at this point, press
STOP.
-
The initial setting is OFF.
-
If there has been a transmission error, this report will he
printed out in all cases.
- FAX-800M -
8 . T R A N S M I T R E P O R T
9 . M E M O R Y S T A T U S L I S T
FAX-700 -
8 . T R A N S M I T R E P O R T
1 . A C T I V I T Y R E P O R T
4-18