Setting the contrast, ;; m – Brother Fax-700 User Manual
Page 84
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
5. ;; M
ADVANCED USES
2.
SETTING THE CONTRAST
Your fax machine comes with an AUTO CONTRAST feature.
This allows you to make copies or send your document and
have the machine automatically define the contrast used for
the document. However, in the case of a very light or very
dark document, you must select SUPER LIGHT or SUPER
DARK for this setting manually. Follow the steps described
below.
1) Set the document face down in the feeder.
F A X : E N T E RN O . & S T A R T
C O P Y : P R E S S C O P YK E Y
2) Press the
CURRENT SETTING
key. A message will
prompt you to use the cursor keys to scroll through the
functions manually. Scrolling will begin automatically af
ter two seconds.
U S E < > T O S C R O L L
E N T E R N O . & S E T K E Y
3) Press 1.
1 . C O N T R A S T
P R E S S S T O P T O C A N C E L
4) Press
SET
to confirm your selection. You will be prompted
to select a contrast setting.
C O N T R A S T : A U T O
S E L E C T < > & S E T K E Y
5) Use the cursor keys (< >) to select the setting you want to
use, then press
SET.
C O N T R A S T : S . L I G H T
S E L E C T < > & S E T K E Y
6) Press
STOP,
then enter the fax number and press
START.
F A X : E N T E RN O . & S T A R T
C O P Y ; P R E S S C O P YK E Y
-
This setting will be effective for only one transmission or
copy.
- Select super light for very light documents and super dark
for very dark documents.
5-4