Brother Fax-700 - Manual (Page 32)

3. >■ SETTING UP
system. This will prevent the unit from being activated each
time a telephone call is received.
- If you have call waiting, ring master, or any other custom
calling feature on your telephone line, it may create a
problem in the operation of your fax unit.
- As with all fax units, this machine must he connected to a
two wire system. If your line has more than two wires,
proper connection of the fax machine can not he made.
Connecting to a private branch exchange
The following points should be kept in mind if you are
iiislalling the machine Lo work with a private branch
exchange (PBX).
1) It is not guaranteed that the unit will operate correctly un­
der all circumstances with approved PBXs. Any cases of
difficulty should be reported first to your Telephone con­
necting company that installed your Telephone System.
2) If all incoming calls will be answered by a switchboard op-
erator, it is recommended that the AUTO ANSWER func­
tion be set to be manual (see page 4-7). All incoming calls
should initially be regarded as telephone calls.
3) The unit may be used with telephones that make use of ei­
ther pulse or tone dialing.
8
.
MAKING A TRIAL COPY
Now that your fax machine is ready for use, it is a good idea
to test it by making a copy.
You can copy any document up to 8.5 inches/216 mm wide
(A4 size). Follow the instructions below.
1) Set the document face down into the feeder. Adjust the
guides located on either side of the document if it is less
than 8,5 inches wide.
2) The following display will appear on the LCD.
F A X : E N T E R N O . & S T A R T
C O P Y ; P R E S S C O P Y K E Y
3-8