Brother Fax-700 - Manual (Page 37)

4. BAStCUSES
3) Press SET to confirm your selection. The secondary func­
tions for this item will be scrolled two at a time on the LCD
until a selection is made.
1 . S E T D A T E A N D T I M E
2 . S E T D A I L Y J O B T I M E R
4) Press 4.
4 . S E T S T A T I O N I D
P R E S S S T O P T O C A N C E L
5) Press SET to confirm your selection. If your station ID has
already been registered^ a message will ask you to confirm
that you want to change the ID.
B R O T H E R
C H A N G E ? l . Y E S 2 . N O
6) Press 1 to proceed and use the number keypad to enter
your fax number (up to 20 digits).
F A X : 0 5 2 8 2 4 2 5 5 4
E N T E R & S E T K E Y
7) After entering the number, press SET and use the number
keypad to enter your telephone number (up to 20 digits).
T E L : 0 5 2 8 2 4 2 7 8 6
E N T E R & S E T K E Y
8) After entering the number, press SET and enter the name
that you want to have appear on your fax transmissions.
This name can be up to 20 characters long. The procedure
for entering names is described in the section
Entering in­
formation using keys on the following page.
9) Press SET the first two secondary functions will appear on
the LCD. Press a number key if you want to continue set­
ting up the machine configuration. If you want to exit op­
erations at this point, press
STOP.
- You can register up to 20 digits for your telephone number
or fax number. The name you register can he no more than
20 characters long.
- The telephone number is only used for the Call Back Mes­
sage and super COVERPAGE features.
- If you do not enter a fax number, no other information can
he entered.
N A M E : B R O T H E R
E N T E R / P R E S S S E T T O E N D
4 . S E T S T A T I O N I D
5 . S E T C O V E R P A G E
- You cannot enter a '"-"using the PAUSE key when register­
ing your fax and telephone number. Use the (<—/—>) cursor
key instead to enter a space. It will be printed as but
will not be displayed.
4-3