Brother Fax-700 - Manual (Page 30)

SETTING UP
4) Close the cover. Be sure not to mistakenly push the release
levers for the cover down into the lower position. These re­
lease levers must be in the upper position (as shown in the
illustration).
If you have inserted the plug into the power supply before
you have loaded the machine with paper, an alarm will
sound and a PAPER jROLL EMPTY message will appear
on the screen.
Use 1" core regular thermal Roll paper or Brother
"THERMA PLUS".
(You may experience some difficulty if you try to use paper
with a core that is less than 1".)
6
.
CONNECTING YOUR FAX TO THE POWER OUTLET
Important
The machine must always be connected to the power
outlet before you connect it to a telephone line.
Similarly when moving the unit, the telephone line
should be disconnected before unplugging the power
cord. This is because the machine relies on the ground
from the plug to prevent any hazardous electrical condi­
tions from developing on the telephone network.
This machine can be plugged into any standard grounded
power outlet. Make sure the socket is grounded and that the
machine is not on the same line as any large appliances or
office machines such as refrigerators or photocopiers. The
power requirements for this fax machine can be found in the
Specifications section on page 8-1.
3-6