Brother Fax-700 - Manual (Page 44)

4. liy: BASIC USES
RING DELAY : This refers to the number of rings before the phone line is connected in
response to a telephone call or fax transmission. You have the option of set­
ting this to 0, 1, 2, 3 or 4 rings.
F/T RINGING : After the line is connected, the machine begins to ring a second time, for a
selectable period of 10, 20, 30 or 60 seconds. This additional ringing period
provides you with extra time to pick up the telephone for a phone conversa­
tion or to receive the manual transmission of a fax. During this period, the
other party can hear "pseudo-ring" back tone.
- The cost of the transmission (borne by the sending party)
will be calculated from the point in time at which the beep
signals that the line connection has been made.
- Following the beep signal, there will be 4 seconds of
silence to enable the machine to detect the CNG tone that
indicates an in-coming fax transmission.
Setting the F/T ring time
You can select the length of time for F/T ringing by following
the procedure described below.
1) Press the FUNCTION key. A message will prompt you to
use the cursor keys to scroll through the functions manual­
ly. Scrolling will begin automatically after two seconds.
u s : < > T O S C R O L L
E N T E R N O . & S E T K E Y
2) Press 4.
4 . U S E R O P T I O N S
P R E S S S T O P T O C A N C E L
3) Press SET to confirm your selection. The secondary func­
tions for this item will be scrolled two at a time on the LCD
until a selection is made.
l . S E T T O N E / P U L S E D I A L
2 . S E T R I N G D E L A Y
4) Press 4.
4 . S F T F / T R I N G T I M E
P R E S S S T O P T O C A N C E L
5) Press SET and use the cursor keys to select 10, 20, 30 or 60
seconds as the F/T ringing time.
F / T R I N G T I M E : 3 0 S E C
S E L E C T < > & S E T K E Y
4-10