Brother Fax-700 - Manual (Page 40)

4. \ BASIC USES
6) Press the * key twice.
N A M E : F R E D !
M A R K -
\"U%r
7) Press SET
- When you press the 1 key, * key, or # key, the lower line of
the screen shows the characters assigned to that key. Press
the key until the cursor is under the character needed.
- You can only overwrite characters. Insertions cannot be
made.
- Insertions can he made only by re-entering all of the infor­
mation to the right of the position where the correction
begins.
- You can overwrite with a space by pressing the * key once,
then press cursor key to move to next position.
- If you want to change a character, use the (<-/—>) cursor
keys to move the cursor underneath the character and
enter a new character.
- Press the CLEAR key to delete the character indicated by
the cursor position, and all characters to the right of the
cursor. You can now continue inputting the rest of your
number or name.
Selecting tone or pulse dialing
There are two different dial types, and you must select the
type of signal suitable for your telephone line.
1) Press the FUNCTION key. A message will prompt you to
use the cursor keys to scroll through the functions manual­
ly. Scrolling will begin automatically after two seconds.
U S E < > T 0 S C R O L L
E N T E R N O . & S E T K E Y
2) Press 4.
4 . U S E R O P T I O N S
P R E S S S T O P T O C A N C E L
3) Press SET to confirm your selection. The secondary func­
tions for this item will be scrolled two at a time on the LCD
until a selection is made.
l . S E T T O N E / P U L S E D I A L
2 . S E T R I N G D E L A Y
4-6