Brother Fax-700 - Manual (Page 138)

TROUBLESHOOTtNG
COMMUNICATION ERRORS
When you are making a transmission^ this message indicates
that either the other party is busy or that no response has
been received. If you have turned the Auto Redial function
ON (see page 4-15)^ the machine will automatically try the
number again after a few minutes. If you have selected to
turn the Auto Redial function OFF, this transmission will be
unsuccessful and transmission verification report (busy) will
be printed out.
The receiving fax machine does not have password, confi­
dential mailbox or relay broadcasting functions. Alterna­
tively, the receiver did not turn one of the above functions
ON. This message will indicate that certain functions such as
password on the IntelliFAX 700/800M, and the confidential
mailbox and relay broadcasting on the FAX-800M—cannot
be enabled because the sending party's machine is not a
Brother machine.
N O R E S P O N S E O R B U S Y
P R E S S S T O P K E Y
N O C O N N E C T A B I L I T Y
P R E S S S T O P K E Y
This may indicate that an incorrect ID number (for password,
password plus, and secure polling on the IntelliFAX 700/
800M, and the confidential mailbox, confidential mailbox
retrieval, or relay broadcast request on the FAX-800M) was
used when the sender made his transmission. Contact the
sender to verify that your ID codes match up correctly. A
transmission verification report (error) will be printed out.
I D M I S M A T C H
P R E S S S T O P K E Y
This message may indicate that either the sending or the
receiving party has interrupted the fax transmission (or
reception) operation.
If you are the sender, this may also indi­
cate a naissed telephone line connection due to an ID mis­
match or the receiving party being unprepared for polling,
and so on. In such circumstances, check with the receiving
party to learn what is happening at the other end of the line.
This message indicates that some communication error has
taken place. "XX YY" represents the error codes used to pro­
vide more detailed information about the error. Refer to the
list shown below.
L I N E D I S C O N N E C T E D
P R E S S S T O P K E Y
C O M M . E R R O R X X Y Y
P R E S S S T O P K E Y
6-8