Brother Fax-700 - Manual (Page 58)

BASIC USES
Manual transmission
To transmit a document manually^ set the document face
down in the document feeder. The following screen appears:
Either press the HOOK key or pick up the handset. Now dial
the number of the destination using one-touch, speed, Tele­
phone Index, or manual dialing. When you hear the answer­
ing fax tone, press the
START key and (if necessary) hang up
the handset.
The document is drawn through the machine automatically.
Upon successful completion of the transmission, the machine
will beep.
- Auto Redial is not effective for manual transmissions.
- Only the following current settings are effective for man­
ual transmissions:
• Resolution • Contrast
• super COVERPAGE • Overseas Mode
• Call Reservation
- When dialing hy Telephone Index, before pressing the
HOOK key or picking up the handset, you should select
the number from the Telephone Index, (see page 4-42)
Points to Remember When Sending a Fax
Bear in mind the following points whenever you send a fax.
• Adjust the guides located on either side of the document if
it is less than 8.5 inches/216 mm wide. (Min. width 5.8
inches/148 mm).
• Do not send documents on any of the following types of
paper:
- Thick paper
- Very thin paper, such as tissue or tracing paper
- Wet, wrinkled, torn, curled, or slick paper
- Thick photographic or coated paper
- Paper with tape or staples, or with metal or textiles at­
tached
F A X : E N T E R N O . & S T A R T
C O P Y ; P R E S S C O P Y K E Y
4-24