Brother Fax-700 - Manual (Page 50)

4. BASIC USES
- The initial setting is ON.
- Even if auto redial is "ON", it cannot be used to send an
automatic transmission if the interrupt function has been
used.
- Auto redial cannot be used for manual transmissions, but
can be used for manually dialed numbers.
- To cancel redial operations, simply press the STOP key at
any given point.
Turning the beeper on and off
The unit has a beeper which sounds to indicate operating
errors, the successful completion and when keys have been
pressed. The beeper can be turned off, so that no sound is
produced. To turn the beeper on or off proceed as follows.
1) Press the FUNCTION key. A message will prumpl you to
use the cursor keys to scroll through the functions manual­
ly. Scrolling will begin automatically after two seconds.
U S E < > T O S C R O L L
E N T E R N O . & S E T K E Y
2) Press 4.
4 . U S E R O P T I O N S
P R E S S S T O P T O C A N C E L
3) Press SET to confirm your selection. The secondary func­
tions for this item will be scrolled two at a time on the LCD
until a selection is made.
1 . S E T T O N E / P U L S E D I A L
2 . S E T R I N G D E L A Y
4) Press 6
. 6 . B E E P E R O N / O F F
P R E S S S T O P T O C A N C E L
5) Press SET and use the cursor keys to turn the beeper ON
or OFF.
B E E P E R : O N
S E L E C T < > & S E T K E Y
4-16