Brother Fax-700 - Manual (Page 49)

4. : BASIC USES
6) After you have made your selection, press SET. The cur­
rent and following secondary functions will appear on the
LCD. Press a number key if you want to work with a differ­
ent user option. If you want to exit operations at this point,
press
STOP.
- The initial setting is 4 rings,
- If the ring delay is set to 0, no ringing will be heard when
receiving a document.
2 . S E T R I N G D E L A Y
3 . A U T 0 R E D I A L O N / O F F
Turning auto redial on and off
If you are sending a fax automatically (see Sending a fax in
this chapter) you can set up the machine to redial the number
automatically if the destination number is engaged. The unit
will redial the last used number up to 3 times at 5-minute
intervals.
1) Press the FUNCTION key, then press 4.
4 . U S E R O P T I O N S
P R E S S S T O P T O C A N C E L
2) Press SET to confirm your selection. The iterns in the sub­
menu for this function will be shown two at a time on the
LCD until a selection is made.
l . S E T T O N E / P U L S E D I A L
2 . S E T R I N G D E L A Y
3) Press 3.
3 . A U T 0 R E D I A L O N / O F F
P R E S S S T O P T O C A N C E L
4) Press SET and use the cursor keys to turn the auto redial
function ON or OFF.
A U T O R E D I A L : O N
S E L E C T < > & S E T K E Y
5) After you have made your selection, press SET. The cur­
rent and following secondary functions will appear on the
LCD. Press a number key if you want to work with a differ­
ent user option, if you want to exit operations at this point,
press STOP.
3 . A U T 0 R E D I A L O N / O F F
4 . S E T F / T R I N G T I M E
4-15