Brother Fax-700 - Manual (Page 38)

4. BASIC USES
Entering information using the keys
The way in which you enter numbers and names into the
machine's memory is the same in all cases.
Entering numbers
To enter a number into the machine, simply type in the num­
ber using the number keys. A horizontal cursor marks the
place where the next digit you enter will be. Every time that
you enter a digit, the cursor is moved one place to the right.
You can also move the cursor left or right using the (^/—^)
cursor keys.
Press the CLEAR key to delete the number indicated by the
cursor position, and all numbers to the right of the cursor.
To modify an existing digit, use the (e-/->) cursor keys to
move the cursor to the position you want to modify, and
input a new digit over the old one.
You cannot insert a space into a number that has been
inputted. You must re-enter it with the space included.
- If you do not press any key for one minute, or if you press
the STOP key, any changes you have made are disregarded
and the original number is retained.
4-4