Brother Fax-700 User Manual
Page 69
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
4.
;
BASIC USES
Sending one>touch faxes
To send a fax to a destination that has been registered as a
one-touch number, simply follow the steps for sending a fax
(either automatically or manually). Instead of using the keys
to dial the number, just press the ONE-TOUCH key for that
destination, (For the FAX-800M, you can hold down the shift
key and then press the
ONE-TOUCH
key for numbers 21-40.)
The stored fax number will be dialed automatically. Press
START
to begin your fax transmission.
Printing a one-touch dial list
Follow the procedure described below to print a list of the
one-touch numbers that have been registered.
1) Press the
FUNCTION
key. A message will prompt you to
use the cursor keys to scroll through the functions manual
ly. Scrolling will begin automatically after two seconds.
USE < > TO SCROLL
ENTER N0. & SET KEY
2) Press
2.
2.PRINT REPORTS
PRESS STOP TO CANCEL
3) Press
SET
to confirm your selection. The secondary func
tions for this item will be scrolled two at a time on the LCD
until a selection is made.
1.ACTIVITY REPORT
2.ONE-TOUCH DIAL LIST
4) Press
2.
2.ONE-TOUCH DIAL LIST
PRESS START KEY
5) Press
START,
and your one-touch dial listings will be
printed out.
PRINTING
ONE-TOUCH DIAL LIST
6) The current and following secondary functions will appear
on the LCD. Press a number key if you want to continue
printing reports. If you want to exit operations at this point,
press
STOP.
P.ONE-TOUCH DIAL LIST
3.SPEED-DIAL LIST
4-35