EVCO c-pro mega RACK - Manual (Page 17)

C-PRO MEGA RACK & C-PRO GIGA RACK APPLICATION MANUAL
Page 17
Other connectors (not present on the C-PRO MEGA RACK controller)
Conn.
Abbre
v.
Description
JN-1 NC 9 relay No. 9 contact normally closed
JN-2 COM 9 relay No. 9 common connection
JN-3 NO 9 relay No. 9 contact normally open
JO-1 NC 10 relay No. 10 contact normally closed
JO-2 COM10 relay No. 10 common connection
JO-3 NO 10 relay No. 10 contact normally open
JP-1 COM11 relay No. 11 common connection
JP-2 NO 11 relay No. 11 contact normally open
JP-3 COM12 relay No. 12 common connection
JP-4 NO 12 relay No. 12 contact normally open
JP-5 COM13 relay No. 13 common connection
JP-6 NO 13 relay No. 13 contact normally open
JQ-1 DI11 No. 11 digital input 230 VAC
JQ-2 DI12 No. 12 digital input 230 VAC
JQ-3 CONHV digital input common connection 230 VAC
Second RS-485 port (on request)
Conn.
Abbre
v.
Description
YE-1 RS485- RS 485 - connector for connecting to supervision system
YE-2 RS485+ RS 485 + connector for connecting to supervisor system
YE-3 GND GND connector for connecting to supervision system, via RS485
RS-232 port (available on request, as an alternative to the second RS-485 port)
Conn.
Abbre
v.
Description
YF-1 5Vdc RS 232 9 pole connector -
YF-2 Tx RS 232 9 pole connector - Transmission Signal
YF-3 Rx RS 232 9 pole connector - Reception Signal
YF-4
DTR/D
SR
RS 232 9 pole connector -
YF-5 GND RS 232 9 pole connector -
YF-6
DTR/D
SR
RS 232 9 pole connector -
YF-7 RTS RS 232 9 pole connector -
YF-8 CTS RS 232 9 pole connector -
Jumper and LED meanings
JMP1 AI1 analogue input selection
Jumper not inserted 0 – 10 V input
Jumper inserted 0 – 5 V, 0 – 20 mA, 4 – 20 mA, NTC, PTC input
JMP2 AI2 analogue input selection
Jumper not inserted 0..10 V input
Jumper inserted 0 – 5 V, 0 – 20 mA, 4 – 20 mA, NTC, PTC input