EVCO c-pro mega RACK - Manual (Page 35)

C-PRO MEGA RACK & C-PRO GIGA RACK APPLICATION MANUAL
Page 35
5 CONFIGURATION PARAMETERS
All the parameters managed by the application are listed below. For each parameter there is also a
brief description, the range of values admissible, the units of measurement, the recommended
default value and the menu in which it may be found. The menus are structured according to the
following logic:
⋅
OR : clock menu
⋅
UT : user menu
⋅
MA: service menu
o MA-F: service menu – operations branch
o MA-M: service menu – manual branch
o MA-IO: service menu - input/output branch
⋅
IS : installer menu
o IS-RC: installer menu – compressor settings branch
o IS-RF: installer menu – fan settings branch
o IS-C: installer menu – compressor branch
o IS-F: installer menu - fans branch
o IS-S: installer menu - safety devices branch
o IS-V: installer menu - miscellaneous branch
⋅
CO : system builder menu
o CO-W: system builder menu – systems branch (configuration wizards)
o CO-Hw: system builder menu – hardware branch
o CO-Pa: installer menu – parameters branch
Parameters table
Code Parameter Description Default Min Max
Uo
M
Menu Notes
CLOCK MENU PARAMETERS – Time band management
PT00
Enable
compressor time
bands
Enables compressor time
band management
NO NO (0) YES (1) OR
PT01..04
Comp. time band
(1..4) Sets the four compressor
time bands
OR
PT11..14
Compressor time
band offset
(1..4) Circuit 1
Sets the offsets to the
compressor setpoints in
relation to the 4 time bands.
Circuit 1
0.0 PC12 PC13 Bar OR
PT21..24
Compressor time
band offset
(1..4) Circuit 2
Sets the offsets to the
compressor setpoints in
relation to the 4 time bands.
Circuit 2
0.0 PC32 PC33 Bar OR
Visible if PG01
> 1
PT31..34
Compressor time
band offset
(1..4) Circuit 3
Sets the offsets to the
compressor setpoints in
relation to the 4 time bands.
Circuit 3
0.0 PC52 PC53 Bar OR
Visible if PG01
> 2
PT50
Enable fan time
bands Enables fan time band
management
NO NO (0) YES (1) OR
PT51..54
Fan time band
(1..4)
Sets the four fan time bands OR
PT61..64
Fan time band
offset (1..4) Sets the offsets to the fan
setpoints in relation to the 4
0.0 PF12 PF13 Bar OR