EVCO c-pro mega RACK - Manual (Page 31)

C-PRO MEGA RACK & C-PRO GIGA RACK APPLICATION MANUAL
Page 31
not yet visible on the page itself. In this specific case, once the screen highlight is on the third
circuit line, pressing DOWN moves the display to the next screen:
Service menu
The user menu is a level 2 menu, i.e. it is necessary to insert the service level password, or higher,
in order to be able to view/modify the parameters in this branch.
In this menu, it is possible to view the status of the various devices, inputs and outputs used by the
application.
Entering the OPERATION menu displays/enables features relating to compressor and fan operation.
For example, the operation times, the status of the relevant alarms and the maximum acceptable
time threshold.
In the MANUAL menu, it is possible to manually/automatically set the compressors and fans and
whether outputs can be forced in order to test functionality
In the I/O STATUS menu it is possible to view all the properties involved with the application inputs
and outputs:
⋅
digital input/output status
⋅
analogue output status
⋅
probe calibration…
Installer menu
The installer menu is a level 3 menu, i.e. it is necessary to insert the installer or system builder
password in order to be able to view/modify the parameters in this branch.
The installer menu contains all the parameters pertaining to the configuration of all the machine
functions (alarms, settings, logic, type of rotation,…).